1⁄35To Preshade or Not Preshade - Part deux
How it came to be.In my previous article on pre-shading I finished with this paragraph: “Build the paint up slowly, to cover where the black pre-shading is will require more paint, where the primer is will require less. By varying the amount of paint, in these areas you will be able to adjust the affect, lighter or darker. You will get darker paint around panels, details, and lighter in the centre of panels and on high spots. This is the theory, and you can see by my Hasegawa 1/48 Hurricane (I hope), that it will work. This was my first attempt and I’m pleased with the results, although I think it could be a little better. One reason for this is the poor lighting in my spray booth, for this technique to be a real success you will need to see what you are doing. As I mentioned before, I think that the way to go would be first of all to use white primer, instead of grey. This, I think would allow for slightly better contrast, and/or more control. It’s easier to add than take away. In other words, as the light spots are the grey primer showing through more than the darker areas and the darkest areas are the camouflage paint toning down the pre-shading. The affect should be easier to control, because you will need slightly more paint, to cover the lightest areas, and therefor you would have more time to stop, if you see what I mean. Secondly by lightening the colours, to take into account the darkening affect of Klear and other varnishes and washes, the darker colours will automatically lend themselves better to this technique”.
Link to my first article. To pre-shade or not to pre-shade
Not long after writing this I did indeed switch to white primer (same stuff Halfords plastic primer) and it does work better, or it is easier to control. So, in my opinion, white primer is the way to go, but the same problems remain, when pre-shading darker uppersurface colours, it is just that now it is easier to control, much as I predicted.
While thinking of ways to make pre-shading even easier to achieve I hit on, what might be seen, as a totally backward step. This idea came about when I was working out how to pre-shade over a natural metal finish, which would be painted over and weathered back quite dramatically, as on some WWII Japanese aircraft. The natural metal will take over from the white primer but the black will show through when the paint is weathered back to the metal, so pre-shading would be impossible, in the normal way. It is from this thought process that I hit on a new way to pre-shade, use the camouflage colour to do the pre-shading. Sounds bizarre, but it does work. I say it does work, but at this moment in time I have only tried it on 2 models, a Gavia Lysander and a Tamiya FW 190D-9. The results are not as I would have liked but do show that the idea has merit, the biggest problem is photographing the technique because, in my spray booth, I have to use a flash, which “washes” out the areas that I’m trying to show. I have had to move my spray booth, which has meant no painting since before Christmas, but my new one is bigger so I might be able to get some better lighting for photography in there. I also have several projects lined up on which I am hoping to show how this technique works. In the meantime I am just letting you know so you can try it, if you like, and give me some feed back. The pictures aren’t the best but they hopefully show the way.
Copyright ©2021 by Mal Mayfield. _OPINIONS IPMS-UK KitMaker Branch, KitMaker Network, or Silver Star Enterrpises. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of KitMaker Network or the British Bulldogs IPMS-UK group. All rights reserved. Originally published on: 2006-03-02 00:00:00. Unique Reads: 22345